Table of Contents
Advertisement
Annual Maintenance
Perform these tasks on an annual basis, as appropriate for your
equipment:
Weight Stack Annual Maintenance
Once a year, Precor recommends disassembling the weight stack to
clean and inspect it thoroughly.
• Carefully remove the cable and guide rods from the weight stack.
Completely disassemble the weight stack in a well-ventilated area,
away from the exercise floor.
• Inspect weight plates and clean them thoroughly. Cracked or
broken plates should be replaced immediately (refer to Obtaining
Service to purchase replacements). Clean each plate individually
and inspect guide bushings.
General Safety and Maintenance Manual: Annual Maintenance
• Inspect the bushings of the top weight plate and each individual
weight plate and replace a plate if it is excessively worn or broken.
• Clean the selector stem and inspect it for wear and damage.
• Reassemble the weight stack.
• Wipe down the weight stack enclosures (shrouds) with a damp
cloth as needed. Inspect all fasteners to ensure the shroud is
securely mounted.
Important: Precor recommends that you replace worn and damaged
cables during routine maintenance. It is recommended that all cables
be replaced annually.
25
Advertisement
Table of Contents
