Installing The Print Head - Canon PIXMA iP4200 Quick Start Manual

Installing the Print Head

• Never attempt to plug the power cord into the power outlet or unplug the power cord when your
hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy
objects on the power cord.
• Never use any power supply other than the standard power supply available in the country of
purchase. Using the incorrect voltage and frequency could cause a fire or electric shock.
• Always push the plug all the way into the power outlet.
If the Top Cover is opened more than ten minutes, the Print Head Holder moves to the right side. If
this occurs, close the Top Cover, and open it again.
Installing the Print Head
ON
Print Head Holder
Print Head Lock Lever
2
1
Plug the printer in.
2
Turn on the printer. Do NOT turn on the
computer yet.
The POWER lamp flashes green and the printer begins
to operate. Wait until the POWER lamp remains lit
green.
3
Open the Top Cover and Paper Output
Tray, and then pull down the Inner
Cover.
Put your fingers in the notches in either side of the Paper
Output Tray and pull down to open it.
Be sure to use both hands to support and lower the
Paper Output Tray.
4
Raise the Print Head Lock Lever.
Do not touch internal parts other than the Print Head
Lock Lever.