Installing The Printer Driver - Macintosh - Canon PIXMA iP4200 Quick Start Manual

Installing the Printer Driver – Macintosh
• Do not remove or insert the USB cable during installation, as this may result in the computer or
printer not operating normally.
• Before installing the driver, disable all anti-virus programs and automatically loading programs or
remove them from your system folder.
1
Ensure that the printer is on, and
connect the printer to the computer with
the USB cable.
2
Turn on the Mac.
3
Place the Setup Software & User's
Guide CD-ROM in the CD-ROM drive.
If the CD-ROM does not run automatically, double-
click the CD-ROM icon on the desktop.
4
Double-click the Setup icon.
5
When the Authenticate screen
appears, enter your administrator name
and password, then click OK.
• If you do not know your administrator name or
password, click
screen, then follow the on-screen instructions.
• If the Select Language screen appears, select a
language, then click Next.
• If the place selection message appears, select your
place of residence, then click Next.
6
Follow the instructions displayed on the
screen. When the screen shown on the
left is displayed, click Easy Install.
When you select Easy Install, the items included in
the CD-ROM are installed automatically.
To select particular items to install, click Custom
Install and follow the instruction on the screen.
®
on the lower-left corner of the
9