Side-Discharging The Clippings - Toro Super Recycler 20062 Operator's Manual

21in lawn mower
Table of Contents

Advertisement

Installing the Grass Bag
1. Raise and hold up the rear door (Figure 25).
Figure 25
2. Remove the rear discharge plug (Figure 25).
3. Install the bag onto the door rod (Figure 26).
Figure 26
4. Lower the rear door (Figure 27).
Figure 27
Removing the Grass Bag
To remove the bag, reverse the steps above.

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it and insert the rear
discharge plug (refer to Removing the Grass Bag) before
side-discharging the clippings.
Important: Ensure that the rear discharge plug is in
place before you recycle the clippings (Figure 28).
Figure 28
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
Installing the Side Discharge Chute
1. Unlock the side discharge door (Figure 29).
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents