Side-Discharging The Clippings; Operating Tips - Toro 20955 Operator's Manual

3. Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps in
Bag (page 11).
Operating the Bag-on-Demand Lever
The bag-on-demand feature allows you to either collect or
recycle grass and leaf clippings while the grass bag is attached
to the machine.
•
For bagging the grass and leaf clippings, press the button
on the bag-on-demand lever and move the lever forward
until the button on the lever pops up
1. Bag-on-demand lever (in bagging position)
•
For recycling the grass and leaf clippings, press the button
on the lever and move the lever rearward until the button
on the lever pops up.
Important: For proper operation, remove any grass
clippings and debris from the bag-on-demand door and
the surrounding opening
the bag-on-demand lever from 1 position to another.
1. Clean here
Installing the Grass
(Figure 22).
Figure 22
(Figure 23) before you move
Figure 23
Side-Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the grass bag is on the machine and the bag-on-demand
lever is in the Bagging position, move the lever to the
Recycling position; refer to
Lever (page 12).
Installing the Side-Discharge Chute
Lift up the side deflector and install the side-discharge chute
(Figure 24).
Removing the Side-Discharge Chute
To remove the side-discharge chute, lift up the side deflector,
remove the side-discharge chute, and lower the side-discharge
deflector.

Operating Tips

General Mowing Tips
•
Clear the area of sticks, stones, wire, branches, and other
debris that the blade could hit.
12
Operating the Bag-on-Demand
Figure 24