Side-Discharging The Clippings - Toro Recycler 20958 Operator's Manual

Figure 21
1. Clean here

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.
If the grass bag is on the machine and the
bag-on-demand lever is in the bagging position,
move the lever to the recycling position; refer to
Operating the Bag-on-Demand Lever (page 11).
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
Installing the Side-discharge Chute
Lift up the side deflector and install the side-discharge chute
(Figure 22).
Removing the Side-discharge Chute
To remove the side-discharge chute, lift up the side deflector,
remove the side-discharge chute, and lower the side-discharge
deflector.
12
Figure 22