Removing The Mower From Storage - Toro Super Recycler 20062 Operator's Manual

Figure 43
Note: Attach the lower handle knobs onto the bolts in
the handle to prevent losing them.
2. Detach the lower handle brackets from the lower end of
both handle sides (Figure 43).
3. Rotate the handle forward (Figure 44).
Important: Route the cables to the outside of the
handle knobs as you fold the upper handle.
Figure 44
4. To unfold the handle, refer to Unfolding the Handle.
Removing the Mower from
Storage
1. Remove the spark plug and spin the engine rapidly using
the starter to blow the excess oil from the cylinder.
2. Install the spark plug and tighten it with a torque
wrench to 15 ft-lb (20 N⋅m).
3. Charge the battery.
4. Connect the wire to the spark plug.
16