Advertisement
P4 201309003 KER755_K60-65.pdf 1C( K) ZB2319 2013.09.06
1005-001900
09
dtp
ctp
Set-Up
helpful hints
1. Plug brewer into its own grounded outlet.
If the electric circuit is overloaded with other
appliances, your brewer may not function
properly. The brewer should be operated on
its own circuit, separate from other appliances.
2. Keep your brewer turned "ON."
To brew a fresh cup of coffee, tea or hot cocoa
anytime you want, keep your brewer turned
"ON" all the time. However, the brewer is fully
programmable so you can set it to turn on and
off automatically to match your schedule.
Or, if you prefer, set the brewer to automatically
turn off after a period of time. Follow the simple
instructions on pages 10–12 to find the settings
that are most convenient for you.
3. For the best tasting gourmet coffee, tea or
hot cocoa, Keurig recommends using bottled
or filtered water.
Water quality varies from place to place.
If you notice an undesirable taste in your cup
of coffee, tea or hot cocoa (such as chlorine
or other mineral tastes) we recommend you
consider using bottled water or water from a
filtration system. For best results, carefully
follow manufacturer's instructions when using
any water filtration system.
4. Customize the size, flavor & brew that's
perfect for you.
With the choice of over 250 varieties of
K-Cup
packs and 3 brew sizes (Small Cup-
®
5.25 oz., Small Mug-7.25 oz. and Large
Mug-9.25 oz.), your Keurig
brewer gives you
®
endless options to customize the size, flavor
and brew that's perfect for you. For a strong,
intense cup, select an Extra Bold K-Cup
pack (with up to 30% more ground coffee than
regular varieties) and brew size that's right
for you. The smaller the brew size, the more
intense flavor in your cup. The larger the brew
size, the less intense flavor in your cup.
5. Remove K-Cup
pack after use.
®
Please see page 7 for brewing instructions.
6. Brewing into a travel mug.
To brew into a travel mug, simply remove the
Drip Tray Assembly and place the travel mug
on the Drip Tray Base.
7. Descale brewer regularly.
Please see page 14 for instructions.
unpacking Instructions
Place brewer box on a large steady surface
1.
(such as a table or countertop) or on the floor.
Open the box.
4
Remove enclosed literature.
2.
Turn the box on its side with front of box
3.
face down.
Reach into the box and grasp the plastic bag
4.
that contains the brewer.
Carefully pull the plastic bag (and packaging
5.
materials) toward you and out of the box. The
®
brewer will still be encased in the polyfoam
and be on its side.
Remove the top polyfoam packaging material.
6.
Carefully lift brewer off of the bottom polyfoam
7.
and place it upright on a flat, steady surface.
Lift plastic bag off of brewer.
8.
Record the serial number for this brewer on
9.
page 3 of this guide. The serial number can
be found on the bottom of the brewer box or
on the brewer behind the Drip Tray (when
removed).
10.
Place the brewer upright on a flat, steady
surface. Remove tape holding Water Reservoir
in place.
We recommend you save all packing materials in
case future shipping of the product is necessary.
WARNING:
Keep all plastic bags away
from children.
Advertisement
