Do you have a question about the K-Slim and is the answer not in the manual?
Questions and answers
roger michaud
April 13, 2025
why doesnt my light come on to brew
1 comments:
Mr. Anderson
April 13, 2025
The brew light on your Keurig K-Slim may not turn on because the coffee maker has no power. This can happen if the internal overheat thermostat has tripped, which may occur when the water tank runs dry—often during descaling—or due to overheating. Resetting the thermostat may be required to restore power.
Page 1
Slim Use & Care Guide Get the most from your new Keurig brewer ®...
Page 2
Before You Brew Plug & Place Rinse & Fill Power Button Remove packing tape from brewer. Remove the water reservoir lid, then lift the reservoir straight up Plug into a grounded outlet. Place to remove it. mug on drip tray. Rinse reservoir with fresh water and fill to the MAX FILL line.
Lower the handle completely and run two water-only brew To replace it, orient the snaps to the indent and just snap it back onto the cycles. Do not insert a K-Cup® pod. K-Cup® pod holder. TIP: Refer to support.keurig.com for video instructions on cleaning the entrance/exit needles.
K-Cup® pod holder. Please allow approximately NOTE: The cleaning action of Keurig® Descaling Solution may result in a “foam” dispensed from the brewer. This 15-20 minutes for the descaling procedure. is natural, as the solution is reacting with the scale inside. For a brewer that is heavily scaled, the brewer may not fill properly after the descaler is added.
God. that you register your brewer on keurig.com/new so that your purchase information will be stored in our system. Keurig will, at its OTHER LIMITATIONS option, repair or replace a defective brewer without charge upon its receipt of proof of the date of purchase.
Page 6
E. Drip Tray Plate F. Drip Tray G. Drip Tray Base H. Water Reservoir Lid I. Water Reservoir For replacement parts, please visit www.keurig.com Coffeehouse taste in your own home. FIND YOUR PERFECT POD With over 75 brands and hundreds of varieties, find your match at keurig.com/new...
Need help?
Do you have a question about the K-Slim and is the answer not in the manual?
Questions and answers
why doesnt my light come on to brew
The brew light on your Keurig K-Slim may not turn on because the coffee maker has no power. This can happen if the internal overheat thermostat has tripped, which may occur when the water tank runs dry—often during descaling—or due to overheating. Resetting the thermostat may be required to restore power.
This answer is automatically generated
Why does descale light stay on?