Advertisement
P15 201309003 KER755_K60-65.pdf 1C( K) ZB2319 2013.09.06
NOTE: If "DESCALE" is still indicated after completing the procedure,
repeat the descaling procedure above.
NOTE: The cleaning action of Keurig
Descaling Solution may result in a foam
™
dispensed from the brewer. This is natural, as the solution is reacting with
the scale inside. For a brewer that is heavily scaled, the brewer may not fill
properly after the descaler is added. If this occurs, you may see only a small or
no output dispensed followed by the sound of air blowing out. If this occurs:
• Turn off and unplug the brewer.
• If there is Keurig
Descaling Solution in the Water Reservoir, discard the
™
contents, rinse the Water Reservoir thoroughly and refill with water.
• Plug the brewer back in, power on, and repeat the Step 3 Fresh Water
Rinse cycle. The brewer should begin to function normally as the solution
is rinsed out and the scale is removed. If problem persists, allow brewer to
sit unplugged for at least 30 minutes before continuing with the rinse.
Visit us online for more information at www.keurig.com/descaling.
1005-001900
09
dtp
ctp
15
Service
Beyond these recommended cleaning and maintenance procedures, this
brewer is not user serviceable. For service, please refer to the Warranty
section of this guide.
Storage
Empty the Water Reservoir before storing, and take care to ensure that you
store your brewer in a safe and
frost free
store your brewer in its
upright position
tank. If you store the brewer in a cold environment, you run the risk of water
freezing inside the brewer and causing damage. When you prepare to use it
after storage, we recommend rinsing the Water Reservoir with fresh water
and running three cleansing brews without a K-Cup
If you plan to move your brewer to a different location, turn the brewer
off, unplug it, and empty the Water Reservoir. If your brewer has been in
an environment below freezing, please be sure to let it warm to room
temperature for at least 2 hours before using.
environment. Please be sure to
to avoid water leakage from the inner
pack.
®
Advertisement
