Light Meter Operating Manual LITEMASTER PRO L-478DR-PX L-478DR-A-PX L-478DR-U-PX This manual is speci c for Phottix operation. Please read the operating manual and safety precaution carefully to fully understand the features of this product before use and keep it for future use. Keep the operating manual in a safe place.
Table of Contents 1 About Phottix System................3 1-1. How to use L-478DR-PX Series with Phottix ......3 1-2. Turning the Power ON ..............3 1-3. Setting Radio Flash Mode in Custom Setting ......4 2 Measuring ..................... 5 2-1. Selecting the Channel and Group ..........5 2-2.
About Phottix System 1-1. How to use L-478DR-PX Series with Phottix System Products Plug-in external or built-in Phottix receivers are required to work with the Phottix radio system. Radio triggering enables a single photographer to easily trigger and control flash units. The radio transmitter built into the L-478DR-PX Series is only compatible with Phottix radio system.
1-3. Setting Radio Flash Mode in Custom Setting Make sure the Radio Mode is set to “On” in Custom Setting in the meter. 1) Press the Menu button on the meter to open the Menu screen. 2) Touch [3. Custom Setting] and select [c) Radio Mode] under [6.
Measuring 2-1. Selecting the Channel and Groups 1) Touch the Tool Box icon ( ) at the bottom right of the Measuring screen to display the Tool Box screen. 2) Touch the [STRATO CH/Group] button to display the STRATO CH/Group Setting screen.
2-2. Measuring in Radio Flash Mode 2-2-1. How to use Radio Triggering 1) Touch the Measuring mode icon ( ) at the top left of the Measuring screen and then select the Radio Flash Mode ( Measuring screen Measuring Mode Selection screen Measuring screen Measuring screen 2) Set ISO sensitivity on the ISO icon.
2-2-2. How to use Flash Control Mode 1) Touch the Flash Control icon ( ) on the Measuring Measuring screen screen to display the Flash Control screen. 2) Select one or more Groups (A to D) and press the Measuring button to trigger the flash units for the selected Groups.
2-3. Measuring in Radio Multiple (Cumulative) Flash Mode 1) Touch the Measuring mode icon ( ) at the top left of the Measuring screen and then select the Radio Multiple (Cumulative) Flash Mode ( Measuring screen Measuring Mode Selection screen Measuring screen 2) Set ISO sensitivity on the ISO icon.
Functions 3-1. Custom Setting Function This enables quick and easy setup of individual meter preference. For other Custom Setting, please refer to the L-478 Series Common Operating Manual. Custom Setting specific to L-478DR-PX Series for Phottix is as follows. 3-1-1. Custom Setting Function List Setting No.
Specifications Radio wave frequency band:2.4GHz Channel:1 to 4 Group: A to D Radio triggering range: 30 meter (100 feet) • T he working distance of the radio triggering system can vary with the orientation and location of the meter and receivers. Legal Requirements ■ Legal Requirements This product complies with the following legal requirements. Destination Standard Details Europe SAFETY EN 60950-1:2006 + A1:2010 + A2:2013 EMS: EN55024:2010...
FCC & IC compliance information • C hanges or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • T his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant. To Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication.
Need help?
Do you have a question about the LITEMASTER PRO L-478DR-U-PX and is the answer not in the manual?
Questions and answers