Filter Name Editing - Sekonic LITEMASTER PRO L-478 Series Operating Manual

6-6-7. Filter Name Editing

In addition to the standard filter name available in the L-478 Series, up to 30 Filter Name
and compensation value can be customized and displayed in the meter screen.
* F ilter compensation is set in 1/10 steps in a range
of ±5.0EV.
* S ee P62 for details on registered filter name and
value.
1. P ress the Menu button
open the Menu screen. (See P21 for details.)
2. Touch the [8. Edit Filter] at the Menu screen.
3. T ouch the check box ✓ to display the
customized Filter name in the Filter pack in
use (Filter compensation) in the Tool Box.
(A check mark ✓ indicates the Filter name
is available for use. To deactivate the Filter
name, touch the box again to return to ❑.)
4. Touch the arrows ▲/▼ or slide finger on the
bar to select the Filter name to display the
Edit Filter screen.
5. T o edit the filter name, touch the [Edit Filter
Name] to display the keypad. Input the name
(Up to 31 characters) and touch [OK] to
enter the filter name and return to Edit Filter
screen. (See P13 for details on inputting the
name.)
6. Touch the [Edit Filter Comp. Value] to display
the keypad. Input the filter compensation
value (+/-5.0EV in 1/10 step increments), and
touch the [OK] to enter the filter comp. value
and return to Edit Filter screen. (See P13 for
details on inputting.)
7 on the meter to
Edit Filter Screen
Select Filter Name to
Edit Filter Name Screen
Filter name
edit button
56
Edit Screen