MartinLogan Motion 60 XTi User Manual page 19

Motion 30i
65–25,000 Hz ± 3 dB
80° x 80°
91 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
400 & 2,600 Hz
1" x 1.4" (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25" x 1.75" (13.3cm x 4.4cm)
diaphragm.
N/A
Two 5.5" (14cm) aluminum cone with cast poly-
mer basket. Non-resonant asymmetrical chamber
format. Rigid structured dust cap to reduce cone
break-up modes.
Ported
Custom air core coil and low DCR steel laminate
inductors. Polyester film capacitors in series and
low DF electrolytic capacitors in parallel. Tweeter
thermal/current protection.
20–200 watts
Custom 5-way tool-less binding posts
18 lbs. (8.2 kg)
6.89" x 16.54" x 10.16"
(174.95 x 420 x 258 mm)
Motion 35 XTi
50–25,000 Hz ± 3 dB
80° x 30°
92 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
2,200 Hz
1.2" x 2.4" (3.2cm x 6.1cm) Folded Motion
Transducer with 4.5" x 2.75" (11.4cm x 7cm)
diaphragm.
N/A
6.5" (16.5cm) aluminum cone with cast polymer
basket. Non-resonant asymmetrical chamber
format. Rigid structured dust cap to reduce cone
break-up modes.
Ported
Custom air core coil and low DCR steel laminate
inductors. Polypropylene film capacitors in series
and low DF electrolytic capacitors in parallel.
Tweeter thermal/current protection.
20–250 watts
Custom 5-way bi-wire tool-less binding posts
17 lbs. (7.7 kg)
13.5" x 7.56" x 11.68"
(343 x 192 x 296.75 mm)
19