Page 2
“dangerous voltage” within the er from whom you purchased this product, email product’s enclosure that may be sufficient to consti- info@martinlogan.com or visit the distributor locator at tute a risk of electric shock. www.martinlogan.com. The exclamation point within an equi-...
Damage will occur to your amplifiers if the jumper clips are not removed. In some countries federal law prohibits MartinLogan from supplying jumper clips. If none are found installed under your speakers binding posts, please refer to...
PASSIVE BI-AMPLIFICATION ACTIVE BI-AMPLIFICATION (F200/F100/C100/B100/F20/F10) We do not recommend active bi-amplification. The internal crossover can not be bypassed. This con- Horizontal Passive Bi-Amplification nection method seriously degrades performance. Vertical Passive Bi-Amplification...
laCement BREAK IN 72 hrs Allow approximately 72 hours of break-in at 90 dB (moderate listening levels) before any critical listening. PLACEMENT F200/F100/B100/F20/F10/B10...
Small exposures to UV will not cause a prob- Could you suggest a list of suitable elec- lem. Filtering of UV rays through glass will greatly tronics and cables ideal for MartinLogan reduce the negative effects. speakers? Should I use a 4, 6, or 8 Ohm rated...
• Check that all system components are turned • If you are unable to resolve your problem, on and source material is playing. please contact your dealer or MartinLogan cus- • Check speaker wires and connections. tomer service (see below).
WARRANTY INFORMATION SERVICE Your speakers are provided with an automatic Should you use your MartinLogan product in a Limited 90 Day Warranty coverage. You have country other than the one in which it was originally the option, at no additional charge, to receive a purchased, we ask that you note the following: Limited 5 Year Warranty coverage.