Frequently Asked Questions; Troubleshooting; Contacting Customer Service - MartinLogan Motion 60 XTi User Manual

F A
requently
How do I clean my speakers?
Use a dust free cloth (such as a micro fiber cloth)
or a soft brush to remove dust from your speakers.
Do not spray any kind of cleaning agent on or in
close proximity to the drivers .
Could you suggest a list of suitable elec-
tronics and cables ideal for MartinLogan
speakers?
We have no favorites and use electronics and
cables quite interchangeably. We would suggest
listening to a number of brands—and above all
else—trust your ears. Dealers are always the best
source for information when purchasing additional
audio equipment.
Is there likely to be any interaction
between my speakers and the televi-
sion in my A/V system?
Yes. These speakers are not shielded and should
be kept at least 2 feet away from a CRT television.
t
roubleshooting
No Output
• Check that all system components are turned
on and source material is playing.
• Check speaker wires and connections.
C C
ontACting
MartinLogan customer service is available
Monday–Friday between the hours of 8am–5pm
(central time) by calling (785) 749-0133 or by
emailing service@martinlogan.com.
14
q
sked uestions
s
ustomer erviCe
Will exposure to sunlight affect the life
or performance of my speakers?
We recommend against placing any loudspeaker
in direct sunlight. Ultraviolet (UV) rays from the sun
can cause deterioration of cabinet, speaker cones,
etc. Small exposures to UV will not cause a prob-
lem. Filtering of UV rays through glass will greatly
reduce the negative effects.
Should I use a 4, 6, or 8 Ohm rated
amplifier with my speakers?
All of our Motion series speakers are compatible
with 4, 6 or 8 Ohm output audio amplifiers and
receivers. Many of the most popular brands of AV
receivers and amplifiers with 4, 6 and 8 Ohm out-
put ratings have been thoroughly tested with all of
our Motion series products and we have found no
compatibility issues except under extreme listening
conditions. For the best performance and sonic
purity when using our Motion series products use
of an amplifier or AV receiver with either a 4 or 6
Ohm output is recommended!
• Check all interconnecting cables.
• If you are unable to resolve your problem,
please contact your dealer or MartinLogan cus-
tomer service (see below).