MartinLogan Motion 60 XTi User Manual page 18

Frequency Response . . . . . . . . . . . . . . . . . . . . .
Dispersion . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Crossover Frequency . . . . . . . . . . . . . . . . . . . . .
High Frequency Driver . . . . . . . . . . . . . . . . . . .
Mid Frequency Driver . . . . . . . . . . . . . . . . . . . .
Low Frequency Drivers . . . . . . . . . . . . . . . . . . .
Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Components . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Amp Power . . . . . . . . . . . . . . . .
Binding Post Inputs . . . . . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions (HxWxD) . . . . . . . . . . . . . . . . . . . .
18
Motion 50 XTi
50–25,000 Hz ± 3 dB
80° x 30°
94 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
900 & 2,200 Hz
1.2" x 2.4" (3.2cm x 6.1cm) Folded Motion
Transducer with 4.5" x 2.75" (11.4cm x 7cm)
diaphragm.
N/A
Two 6.5" (16.5cm) aluminum cone with cast poly-
mer basket. Non-resonant asymmetrical chamber
format. Rigid structured dust cap to reduce cone
break-up modes.
Ported
Custom air core coil and low DCR steel laminate
inductors. Polypropylene film capacitors in series
and low DF electrolytic capacitors in parallel.
Tweeter thermal/current protection.
20–300 watts
Custom 5-way bi-wire tool-less binding posts
29 lbs. (13.2 kg)
7.56" x 22.83" x 12.52"
(192 x 580 x 318 mm)