Call Transfer Using Intercom - AT&T SynJ SB67108 User Manual

Handset operation

Call transfer using intercom

You can transfer a call to any other system telephone.
1. During a call, press INT.
DIR or CID
2. Press
extension number. Press
-OR-
Press the desired extension number,
the base, or # (pound key) for all.
The outside call is put on hold and your handset
screen shows Calling X:Handset X, Calling X:Deskset X,
Calling :Base, or Calling All.
*
3. The other handset or base rings and its screen shows
Call X:Handset X.
4. Answer an intercom call just as you would answer a
normal call, or press INT. The outside call is still on
hold and both handsets now show Intercom. You can now have a
private conversation between the system devices.
NOTE: Before the intercom call is answered, you can cancel the call transfer and return
to the external call by pressing the L 1-L 4 key on your handset.
5. From this intercom call, you have the following options:
• You can let the other handset join you on the outside call in a
three-way conversation. Press the Conf softkey on your handset.
• You can release the outside call to the other extension before the
intercom call is answered (blind transfer). Press
or place your handset back in the charger. The other handset
automatically connects to the outside call.
NOTE: If a transferred call is not answered after 30 seconds, the transfer is canceled.
The external call returns to the originating handset and is on hold. If the hold reminder
is turned on, the handset beeps every 30 seconds. Press the L 1-L 4 key to answer the
external call.
• You can return to the outside call. Press the L 1-L 4 key on your handset.
• The other person can end the intercom call by pressing
OFF�
CLEAR
charger. Press the line key on the original extension to resume
the outside call.
to scroll to the desired
�ENTER.
MENU
, or by placing the other handset back in the
(star key) for
37
L1
*: Base *: Base
1: Handset 1
#: All
Back
L1
Calling
1:Handset 1
Hold Line 1
Intercom 00:01:15
OFF� ,
CLEAR