Using The Seam Guides On The Needle Plate; Turning Square Corners - Janome 2206 Instruction Manual

Janome 2206 Instruction Manual
3
4
www.toews.com
1
2
5
2

Using the Seam Guides on the Needle Plate

The seam guides on the needle plate help you to measure
seam width.
* The numbers indicate the distance between the center
needle position and the guide line.
Numbers on the needle plate
Distance in centimeters
1 Guide lines
2
Cornering guide
3
Needle plate
4 Needle plate hole
5 Seam width from the center needle position

Turning Square Corners

To turn a square corner 1.6 cm (5/8") from the fabric edge.
When the fabric edge facing you lines up with the cornering
guide as illustrated, stop stitching and lower the needle by
turning the handwheel towards you.
Raise the presser foot and turn the fabric to line the edge
with the 1.6 cm (5/8") seam guide.
Lower the presser foot and begin stitching in the new
direction.
Cornering guide
2
28
10 15 20 3/8" 4/8"
1.0 1.5 2.0 1.0 1.3
2206 Owners Manual/ User Guide
5/8" 6/8"
1.6 1.9