Dmz - TRENDnet TEW-652BRP User Manual

 Protocol: Select the protocol (TCP, UDP, or * for TCP+UDP) that can be used
to access the application.
 Port Range: Type the port range that can be used to access the application in
the text boxes.
Incoming: Defines which incoming communications users are permitted to
connect with.
 Protocol: Select the protocol (TCP, UDP, or * for TCP+UDP) that can be used
by the incoming communication.
 Port: Type the port number that can be used for the incoming
communication.
 Add: Click to add the special application profile to the table at the bottom of
the screen.
 Update: Click to update information for the special application if user have
selected a list item and have made changes.
 Delete: Select a list item and click Delete to remove the item from the list.
 Cancel: Click Cancel button to erase all fields and enter new information.
This screen enables users to create a DMZ for those computers that cannot access
Internet applications properly through the WLAN Router and associated security
settings.
Note: Any clients added to the DMZ exposes the clients to security risks such as
viruses and unauthorized access.
Enable: Click to enable or disable the DMZ.
DMZ Host IP: Type a host IP address for the DMZ. The computer with this IP
address acts as a DMZ host with unlimited Internet access.
Apply: Click to save the settings.

DMZ