TRENDnet TEW-652BRP User Manual page 75

Enable: Click to enable or disable the virtual server.
Name: Type a descriptive name for the virtual server.
Protocol: Select a protocol (TCP or UDP) to use for the virtual server.
Private Port: Type the port number of the computer on the LAN that is being used
to act as a virtual server.
Public Port: Type the port number on the WAN that will be used to provide access
to the virtual server.
LAN Server: Type the LAN IP address that will be assigned to the virtual server.
 Add: Click to add the virtual server to the table at the bottom of the screen.
 Update: Click to update information for the virtual server if the user has
selected a listed item and has made changes.
 Delete: Select a listed item and click Delete to remove the item from the list.
 Cancel: Click Cancel button to erase all fields and enter new information.