Table of Contents
Advertisement
TRENDnet User's Guide
Firewall
Firewall > Firewall Settings
The firewall setting allows all of the specified incoming rules to function. By default, this
setting is enabled and it is recommended to keep the default setting.
1. Log into your router management page (see
on page 23).
2. Click on Firewall and Firewall Settings.
3. Under the Firewall section, select Enabled or Disabled to enable or disable the
firewall functions. To save changes to this section, click Apply at the bottom of the page
when finished.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your router management
page"
Open a device on your network to the Internet
This router can provide access to devices on your local area network to the Internet
using the Virtual Server, Special Application, method (DMZ NOT recommended).
DMZ
Firewall > DMZ
You may want to expose a specific computer or device on your network to the Internet
to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature
that makes all the ports and services available on the WAN/Internet side of the router
and forwards them to a single IP address (computer or network device) on your
network. The DMZ feature is an easy way of allowing access from the Internet however,
it is a very insecure technology and will open local area network to greater threats from
Internet attacks.
It is strongly recommended to use Port Forwarding to allow access to your computers
or network devices from the Internet.
1. Log into your router management page (see
on page 23).
2. Click on Firewall and DMZ.
3. Under the DMZ section, check the Enable DMZ option to enable DMZ and enter the IP
address the IP address you assigned to the computer or network device to expose to the
Internet.
4. To save changes to this section, click Apply at the bottom of the page when finished.
TEW-830MDR / TEW-830MDR2K
"Access your router management
page"
39
Advertisement
Table of Contents
