Lexmark E350d Menus And Messages Manual page 20

Menu selection Purpose
Point Size Specifies the point size for scalable
typographic fonts
Pitch Specifies the font pitch for scalable
monospaced fonts
Symbol Set Determines the symbol set for a
specified font name
Orientation To determine how text and graphics are
oriented on the page
Lines per Page Determines the number of lines that
print on each page
A4 Width Specifies the width of the logical page
for A4 size paper.
Using printer menus
Values
1...1008
in increments of 0.25
points)
12*
0.08...100
(in increments of 0.01 cpi)
10*
10U PC-8* (US)
(country/region-specific
factory default values)
12U PC-850* (non-US)
(country/region-specific
factory default values)
Portrait*
Landscape
1...255
60*
(country/region-specific
factory default values)
64*
(country/region-specific
factory default values)
198 mm*
203 mm
20
Point size refers to the height of the
characters in the font. One point equals
approximately 1/72 of an inch. You can
select point sizes from 1 to 1008 in
increments of 0.25 points.
Point Size is only displayed for
typographic fonts.
Pitch refers to the number of fixed-space
characters in a horizontal inch of type.
You can select a pitch from 0.08 to 100
characters per inch (cpi) in increments of
0.01 cpi. For nonscalable monospaced
fonts, the pitch is displayed, but cannot
be changed.
Pitch is only displayed for fixed, or
monospaced, fonts.
A symbol set is a set of alphabetic and
numeric characters, punctuation, and
special symbols used when printing with
a selected font. Symbol sets support the
different requirements for languages or
specific applications, such as math
symbols for scientific text. Only the
symbol sets supported for the selected
font name are displayed.
Prints text and graphics parallel to the
short edge of the paper
Prints text and graphics parallel to the
long edge of the paper
The printer sets the amount of space
between each line (vertical line spacing)
based on the Lines per Page, Paper Size,
and Orientation menu items. Select the
correct Paper Size and Orientation before
changing Lines per Page.
Makes the logical page compatible with
the Hewlett-Packard LaserJet 5 Printer
Makes the logical page wide enough to
print eighty 10-pitch characters