Operating Instructions
2
MVME240 x
Switches
2-2
STARTUP
INITIALIZATION
POST
BOOTING
MONITOR
The front panel of the MVME240x module is shown on a following page.
There are two switches
status indicators (
BFL, CPU, PMC (two)
panel.
Power-up/reset initialization
Initialize devices on the MVME240x
module/system
Power On Self Test diagnostics
Firmware-configured boot mechanism,
if so configured. Default is no boot.
Interactive, command-driven on-line PowerPC
debugger, when terminal connected.
and
) and four LED (light-emitting diode)
(ABT
RST
) located on the MVME240x front
Computer Group Literature Center Web Site