Motorola MVME2401-1 Installation And Use Manual page 24

Preparing and Installing the MVME2400-Series Module
1
1-8
Some options, however, are not software-programmable. Such options are
controlled through manual installation or removal of header jumpers or
interface modules on the MVME240x or the associated modules.
Figure 1-1 illustrates the placement of the switches, jumper headers,
connectors, and LED indicators on the MVME240x. Manually
configurable items on the MVME240x include:
Flash memory bank A/bank B reset vector (J8)
VMEbus system controller selection header (J9)
General-purpose software-readable header (S3)
The MVME240x has been factory tested and is shipped with the
configurations described in the following sections. The MVME240x
factory-installed debug monitor, PPCBug, operates with those factory
settings.
Computer Group Literature Center Web Site