Appendix B Specifications; Specifications; Table B-1. Mvme240X Specifications - Motorola MVME2401-1 Installation And Use Manual

Specifications

The following table lists the general specifications for the MVME240x
VME processor module. The subsequent sections detail cooling
requirements and EMC regulatory compliance.
A complete functional description of the MVME240x boards appears in
Chapter 3. Specifications for the optional PMCs can be found in the
documentation for those modules.
Characteristics
MPU
Memory
TOD clock device
Timers
Power requirements,
with no PMCs installed
(See Note)
Operating temperature
Storage temperature
B
Table B-1. MVME240 x Specifications
MPC750
233 MHz
MPC750
350 MHz
SDRAM
Flash
M48T559
One watchdog timer; time-out generates reset
Four real-time 16-bit programmable timers
+12Vdc, 0mA
–12Vdc, 0mA
(typical)
0°C to 55°C entry air with forced-air cooling (refer to Cooling
Requirements section)
–40°C to +85° C
Specifications
Specifications
SPECint95
(estimated =
5.2 @ 60ns EDO to 8.7 @ 50ns EDO)
16KB/16KB I/D on-chip cache
SPECint95
10.8 @ 50ns EDO
32KB/32KB I/D on-chip cache
32MB, 64MB, or 128MB
ECC-protected
1MB via two 32-pin PLCC sockets
8MB via surface mount
8KB NVRAM
+5Vdc (±5%), 4A typical, 4.75A maximum
with MP603
+5Vdc (±5%), 4.5A typical, 5.5A maximum
with MP604
B
B-1