Selecting The Bluetooth Device; Setting A Voice Command - Kenwood KDC-U5049DAB Instruction Manual

Selecting the Bluetooth Device

1 Press and hold the volume knob to enter
Bluetooth mode.
Turn the volume knob to select
2
[SETTINGS], then press to enter.
Turn the volume knob to select
3
[PAIRING], then press to enter.
Turn the volume knob to select [PHONE
4
SELECT] or [AUDIO SELECT], then press
to enter.
Turn the volume knob to select a
5
Bluetooth device name.
6 Press the volume knob to set up the
Bluetooth device.
■
"✱(Device name)": The selected Bluetooth
device is busy.
■ "-(Device name)": The selected Bluetooth
device is on standby.
■
" (Device name)": The Bluetooth device is
deselected.
■
If a cell-phone is already selected,
deselect it, and then select a different
one.
Hold to finish the procedure.
7
■
To exit Bluetooth mode, press

Setting a Voice Command

Registering Phone Book Name
Press and hold the volume knob to enter
1
Bluetooth mode.
Turn the volume knob to select
2
[SETTINGS], then press to enter.
Turn the volume knob to select [VOICE
3
TAG], then press to enter.
Turn the volume knob to select [PB
4
NAME EDIT], then press to enter.
Search for the Phone Book name to
5
register
Select the name to register with reference
to 5 in <Calling a Number in the Phone
Book> (page 21).
If a voice tag has already been registered
for a name, "*" is displayed before the
name.
Turn the volume knob to select [PB
6
NAME REG], then press to enter.
■
■
7 "ENTER 1" is displayed. When a beep is
heard, say a voice tag within 2 seconds.
"ENTER 2" is displayed. When a beep is
8
heard, say the same voice tag as that you
said in step 7 within 2 seconds.
"COMPLETE" is displayed.
Press the volume knob to return to step
9
5.
■
To exit Setting mode, press
■
To exit Bluetooth mode, press
■
You can register up to 35 voice tags.
■
Audio sound is not output during voice tag
registration.
Registering Phone Book Name Type
Press and hold the volume knob to enter
1
Bluetooth mode.
Turn the volume knob to select
2
SRC.
[SETTINGS], then press to enter.
Turn the volume knob to select [VOICE
3
TAG], then press to enter.
Turn the volume knob to select [PN TYPE
4
EDIT], then press to enter.
Turn the volume knob to select
5
[GENERAL], [HOME], [OFFICE], [MOBILE],
or [OTHER], then press to enter.
6 Turn the volume knob to select [PN TYPE
REG], then press to enter.
■
■
"ENTER 1" is displayed. When a beep is
7
heard, say a voice tag within 2 seconds.
To select "PB NAME CHK", play the
registered voice.
To select "PB NAME DEL", delete a voice
tag. Turn the volume knob to select "YES",
then press to confirm.
To select "PN TYPE CHK", play the
registered voice.
To select "PN TYPE DEL", delete a voice
tag. Turn the volume knob to select "YES",
then press to confirm.
.
SRC.
Continued to next page
25
English