Page 5
Insert wooden dowel (A) into side panel (5,6) and parts (9). Secure cam bolt (C) to panel (3,4). Secure cam bolt (B) to side frame (7).
Page 6
Insert side panel (5,6) to panel (4), then insert and secure cam lock (D) to side panel (5,6) to lock it. Insert bottom panel (2) through side panel (5,6).
Page 7
Insert parts (9) into panel (4), then insert and secure cam lock (D) to parts (9) to lock it. Insert panel (3) into side panel (5,6), then insert and secure cam lock (D) to parts (9) and side panel (5,6) to lock it.
Page 8
Insert side frame (7) into panel (3,4), then insert and secure cam lock (D) to panel (3,4) to lock it. Insert side frame (7) into panel (3,4), then insert and secure cam lock (D) to panel (3,4) to lock it.
Page 9
Use wrench (N) to secure side panel (5,6) to side frame (7) with bolt (E). Use wrench (N) to secure bottom panel (8) to side frame (7) with bolt (F).
Page 10
Secure hinge (H) to top panel (1) with screw (G). Place cotton pad (K) as per diagram. Secure top panel (1) and hinge (H) to panel (4) with screw (G) as per diagram.
Page 11
Place sticker (J) over holes as per diagram. Secure right hinge (L) to side panel (5) and top panel (1) with screw (G).
Page 12
Secure left hinge (M) to side panel (6) and top panel (1) with screw (G).