Page 6
Securely screw the cam bolts (B) on parts (1 and 2) with a Philips screwdriver as per diagram .
Page 7
Insert wooden dowels into parts (3,4). Securely screw the cam bolts (B) on parts (3 and 4) with a Philips screwdriver as per diagram.
Page 8
Insert wooden dowels into parts (5,6,7). Securely screw the cam bolts (B) on parts (6 and 7) with a Philips screwdriver as per diagram.
Page 9
Using screw (N) attach the leg (10) to bottom panel (2) with a Philips screwdriver as per diagram. Please kindly noted the legs placed the same direction as the AI shows .
Page 10
Using cam locks(C) attach part (3) to part(5) and then using cam locks(C)attach the other side of part (3) to part (6)with a Philips screwdriver as per diagram.
Page 11
Using cam locks(C) attach part (4) to part(5) and then using cam locks(C)attach the other side of part (4) to part (7)with a Philips screwdriver as per diagram.
Page 12
Using cam locks (C) attach parts(5,6) to part (2) with a Philips screwdriver as per diagram.
Page 13
Using cam locks (C) attach parts(5,7) to part (2) with a Philips screwdriver as per diagram.
Page 14
Align and attach part(1) with parts(6,7) with cam locks (C) with a Philips screwdriver as per diagram.
Page 15
Using screw (E) secure part(11) to parts (2,3,5);part (12)to parts (2,4,5) with a Philips screwdriver as per diagram.
Page 16
Attach parts(13,14) with part (17) as per diagram...
Page 17
Using screw (E) secure part (13) to parts (2,6,7,11,12),part (14) to parts(1,6,7,11,12) with Philips screwdriver as per diagram.
Page 18
Using sticker (F) cover the cam lock holes as per diagram.
Page 19
Insert shelf support pin (D) into parts (5,6,7) as per diagram .
Page 20
Make sure you place the four shelf pins in the same level so the shelf is not tilted . Tilt and rest the adjustable shelves (8,9) onto the shelf support pin (D)as per diagram .
Page 21
Stick the rubber pad on front of the adjustable shelves (8,9) as per diagram .
Page 22
Using handle bolt (H) secure handle (G) to part(15);handle (M) to parts (16,18),then using screw (K) secure Europe hinge (J) to parts (15,16,18) with a Philips screwdriver as per diagram.
Page 23
Using screw (K) secure Europe hinge (J) to parts (5,7) with a Philips screwdriver as per diagram.
Page 24
Using screw (K)secure Europe hinge (J) to parts (5,6)with Philips screwdriver as per diagram. After assembled the four doors . please close and open the doors to make sure they are align and shut correctly ,if necessary adjust the screw (K) for a good fit .
Page 25
Using screw (Q) secure the part (S)to back panels (11,12) a Philips screwdriver as per diagram.
Page 26
Take out the wooden panel of the faux cable holes if necessary .
Page 27
Insert the plastic nut (T) into the wall and using screw (R) fix the other side of strap (S) with nut (T)in the wall .The unit is now ready for use .