Fanimation Bayhill LB230VZ Owner's Manual page 9

Assembling and Mounting the Fan Blades, & Adapter/Switch Hsg
5. Attach assembled blades and blade holders to the motor
hub using the provided screws. (Figure 3)
6. Make sure the screws securing the blade holders to the
motor hub are tight and that the blade holders are properly
seated.
NOTE: Supply wires and fan wires omitted for clarity.
Housing Switch Cup/Adapter Assembly:
7. Disassemble the Housing Switch Cup/Adapter assembly
by removing three screws.
8. Assemble the Adapter assembly on the Housing Support
bracket and tighten three screws. (Figure 4)
9. Securely attach the 9-pin switch cup connector to wiring
harness socket within Adapter assembly.
10. Assemble the Housing Switch Cup onto the assembled
Adapter with three screws. (Figure 5)
11. Restore Power and your fan is now wired to be turned
on and off from the wall control.
9
Screw
(2 per blade
holder)
Figure 3
Figure 4
Figure 5