Commissioning; Description Of The Sincos Option Module Kit; Diagnosis; Maintenance - Bosch rexroth NYCe 4000 Instructions Manual

NYCe 4000 Multi-axis motion control
system

11 Commissioning

The NYM04.1-ESC-NNNN-NY4199 has two headers that connect to mating
sockets on the drive module that supports this option, see chapter 4.

12 Description of the SinCos Option module Kit

The NYM04.1-ESC-NNNN-NY4199 Kit consists of one circuit board, one screw,
one distance bushing, one curled washer and one nut.

13 Diagnosis

No diagnosis is available for the NYM04.1-ESC-NNNN-NY4199.

14 Maintenance

The NYM04.1-ESC-NNNN-NY4199 has no special maintenance requirements.

15 Disposal

15.1 Products

Our products can be returned to us free of charge for disposal. It is a
precondition, however, that the products are free of oil, grease or other dirt. In
addition, when returned the products must not contain any undue foreign
matter or foreign component.
Please send the products "free domicile" to the following address:
Bosch Rexroth AG
Bgm-Dr.-Nebel-Str. 2
97816 Lohr a.Main, Germany

15.2 Packaging materials

The packaging materials consist of cardboard, wood and polystyrene. They can
be easily recycled. For ecological reasons you should not return the empty
packages to us.

15.3 Environmental protection

No release of hazardous substances.
●
Our products do not contain any hazardous substances that they can release
in the case of appropriate use. Normally there are not any negative effects on
the environment to be expected.
Materials contained in the products.
●
Electronic devices.
R911338750_Edition 05 Bosch Rexroth AG
11/19
Disposal