Ce Marking; Ul Certification - Bosch rexroth NYCe 4000 Instructions Manual

NYCe 4000 Multi-axis motion control
system
IEC61000-6-4:2018 (Electromagnetic compatibility (EMC) - Part 6-4: Generic
●
standards - Emission standard for industrial environments)

8.2 CE marking

Declaration of Conformity
Fig. 8-1: CE logo
The SinCos Option module described in the present instructions complies with
the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC Directive 2014/30/EU
●
Maintaining the EMC directive presuppose an EMC adapted installation of the
devices within the installation of the machine. The complied limit values and
standards are specified in the Rexroth Manual of associated product. The
regulations for the structure and the installation in this manual must be
maintained and realized. Tests were run using a typical installation in a test
assembly that conforms with the standards. These Rexroth products are built-in
devices for a product for the final user. The test results cannot be transferred to
every state as installed in every product intended for the final user. This
declaration does not therefore assure the EMC characteristics of the product for
the final user.

8.3 UL certification

Fig. 8-2: UL Recognized logo
The SinCos Option module
NYM04.1-ESC-NNNN-NY4199
●
is certified according to
UL 61010-1:2012
●
UL file no. E353498
However, there can exist combinations with modules or accessories with limited
or missing certification. Therefore, verify the registration according to the UL
marking on the components.
R911338750_Edition 05 Bosch Rexroth AG
7/19
Standards