Siemens SIMATIC S5 CP 521 Manual page 70

CP 521
Page format
The page format is defined by configuring of parameter blocks 5 and 6.
Line
1 Blank line
. Blank line
.
. Page No.
. Blank line
. Header1
. Header2
. Blank line
. Blank line
.
. Lines for message texts
. A maximum of 255 message texts can be configured.
. Each individual message text must not be configured with more
. than 80 characters
. Configuration is described in 6.3.
.
. Blank line
. Blank line
. Footer1
. Footer2
. Blank line
. Page No.
Blank line
n Blank line
Left margin (configurable up to <60 characters)
Number of lines per page 32 to 255
(configurable in the range ( 20
GWA 4NEB 812 6030-02b
Table 6-6. Page Format
Page format
(if page number, header or footer have been
configured)
(if page number, header or footer have been
configured)
(top, if configured)
(if page number configured at top)
(if one or two headers have been configured)
(if two footers have been configured)
(if one footer has been configured)
(if the page number is configured at bottom)
(bottom, if configured)
(if one or two headers have been configured)
to FF )
H H
Print Mode
6-13