Table of Contents
Advertisement
Print Mode
6.6.7
Printout of All Configured Message Texts (Job 80
When instructed by the CPU, the CP 521 prints out all configured message texts
on the user submodule. The message texts are printed as configured with
message text number in ascending order. Place holders are not evaluated.
You can assign the job in two ways:
•
In the user program
•
In RUN mode with the "FORCE VAR" programmer function
Operator inputs required
Specify byte 0 in job 80
H
Example: Printing out all configured message texts with the "FORCE VAR"
programmer function
The module is installed in slot 7 (initial address 120).
Operand
Signal States
QB 120
KH= 8000
6-56
.
Job: "Print all configured messages"
CP 521
)
H
Meaning
GWA 4NEB 812 6030-02b
Advertisement
Chapters
Table of Contents
