Stuart Turner Monsoon U1.5 bar Twin Installation, Operation & Maintenance Instructions Manual page 5

• This appliance must be earthed via the supply cord, which
must be correctly connected to the earth point located in the
terminal box.
• The supply cord and internal wiring within the terminal box
are routed and secured to ensure compliance with the
electrical standard EN 60335-1. It is essential that prior to
any disturbance of this internal wiring, all cable routing and
securing details are carefully noted to ensure re-assembly to
the same factory pattern is always maintained.
• If the supply cord is to be changed or is damaged, it must be
replaced with a special cord assembly available from Stuart
Turner or one of their approved repairers.
Please read installation details carefully as they are intended to ensure this product
provides long, trouble free service. Failure to install the unit in accordance with
the installation instructions will lead to invalidation of the warranty.
3