Advertisement
Quick Links
Wall Cabinet
Assembly Instructions
833/4431
- please keep for future reference
Dimensions
Width - 30cm
Depth - 15cm
Height - 50cm
Important
– Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
Issue 1 - 23/04/11
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for hygena 833/4431
Summary of Contents for hygena 833/4431
- Page 1 Wall Cabinet Assembly Instructions 833/4431 - please keep for future reference Dimensions Width - 30cm Depth - 15cm Height - 50cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800...
- Page 2 Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the • Do not stand or put weight on • We do not components and tools listed on the product, this could cause recommend the pages 1 and 2.
- Page 3 Components - Panels Please check you have all the panels listed below 1 Top x 1 2 Base x 1 3 Right side x 1 (30(w)cm x 15(d)cm) (27(w)cm x 13.5(d)cm) (47(h)cm x 13.5(d)cm) 4 Left side x 1 5 Support rail x 1 6 Back panel x 1 (47(h)cm x 13.5(d)cm) (24(w)cm x 6(h)cm)
- Page 4 Components - Fittings If you have damaged or missing components, call the Customer Helpline: 0845 640 0800 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
- Page 5 Using Camlocks Step 1 Step 3 Connect the male Push the male camlock camlock as directed in into the entry hole. the assembly instructions using a screwdriver. Step 4 Step 2 Turn the female camlock Insert the female clockwise with a camlock as shown in the screwdriver.
- Page 6 Assembly Instructions Assembly Instructions Step 3 Step 3 Screw 2 x male camlock Insert 2 x 30mm wooden dowel into reverse of drawer into each end front of support rail as shown. shown. Step 4 Insert 4 x female camlock into right Step 4 side...
- Page 7 Assembly Instructions Assembly Instructions Step 6 Step 6 Connect top base Connect top and top shelf assembly completed to top right side at Step 5 as shown and tighten the female Tighten female camlocks camlocks inside the unit in under side of top base with a screwdriver.
- Page 8 Assembly Instructions Step 9 Connect door to the unit using 2 x hinge and 8 x 10mm screw as shown ( Connect handle door using 2 x 16mm bolt Connect catch plate to door using 1 x 10mm screw Note: catch plate must be attached with the countersink facing outwards so as to...
- Page 9 Assembly Instructions Step 10 Note: you may find it easier to have help from another person at this stage. To fix the unit to a wall hold the unit in the desired position against the wall, using a spirit level to ensure the unit is horizonal/vertical.
-
Page 12: A Guide To Wall Mounting & Fixings
A Guide to Wall Mounting & Fixings IMPORTANT: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure.
Need help?
Do you have a question about the 833/4431 and is the answer not in the manual?
Questions and answers