Paired Devices View - Nokia 3250 User Manual

C o n n e c t i v i t y
one. You can see a device icon,
the device name, the device
type, or a short name. Paired
devices are shown with
To interrupt the search, select
Stop. The device list freezes
and you can start to form a
connection to one of the
devices already found.
4. When searching for devices,
some devices may show only
the unique device addresses. To
find out the unique address of
your phone, enter the code
*#2820# in the standby mode.
If you have searched for
devices earlier, a list of the
devices that were found
previously is shown first. To
start a new search, select
devices. If you switch off the
phone, the list of devices is
cleared and the device search
needs to be started again
before sending data.
5. Scroll to the device you want to
connect with, and select it. The
item you are sending is copied
to the outbox, and the note
Connecting is shown.
6. Pairing (if not required by the
other device, go to step 7.)
• If the other device requires
pairing before data can be
transmitted, a tone sounds
100
Copyright © 2006 Nokia. All rights reserved.
and you are asked to enter a
passcode.
• Create your own passcode
.
(1-16 characters long,
numeric) and agree with the
owner of the other device to
use the same code. This
passcode is used only once
and you do not have to
memorize it.
• After pairing, the device is
saved to the
view.
7. When the connection has been
successfully established, the
note Sending data
Data received using Bluetooth
connection can be found in the
Inbox folder in Messag..
More
Icons for different devices:
(Computer),
(Audio/video), and
device)
If sending fails, the message or
data are deleted. The
in Messag.
messages sent using a Bluetooth
connection.

Paired devices view

Paired devices are indicated by
in the search result list. In the
Bluetooth main view, scroll right
to open a list of paired devices.
Paired devices
is shown.
(Phone),
(Bluetooth
Drafts folder
does not store