Date And Time; Security - Nokia 3250 User Manual

"Configuration settings service",
p. 11.
To view the list of configurations
saved to your phone, select
Menu > Tools > Settings
Connection > Configurations. To
delete a configuration, scroll to
the configuration, press the
joystick, and select Delete.

Date and time

To define the date and time used in
your phone, and change the date
and time format and separators,
select Menu > Tools
Date and time and from the
following options:
Time and Date — to set the time
and date
Time zone — to set the time zone
of your location. If you set
Network operator time
Auto-update, the local time is
shown.
Date format — to select the
format to display dates
Date separator — to select the
date separator
Time format — to select between
24-hour and 12-hour time format
Time separator — to select the
time separator
Clock type — to select whether the
analog or digital clock is shown in
the standby or active standby
mode. See
Clock alarm tone
alarm clock tone
>
Network operator time
service) — to allow the network to
update time, date, and time zone
information to your phone. If you
select Auto-update, all active
connections are disconnected.
Check any alarms as these may be
affected.

Security

> Settings >
Phone and SIM
You can change the following
codes: lock code, PIN code, and
PIN2 code. These codes can only
include the numbers from 0 to 9.
Avoid using access codes similar to
emergency numbers, to prevent
>
accidental dialing of the
emergency number.
To set the security settings, select
Menu >
Security
from the following options:
Code in use
code,
USIM. This is shown only if the
active USIM supports UPIN, and
the UPIN is not rejected.
PIN code request
request) — to set the phone to
Copyright © 2006 Nokia. All rights reserved.
"Clock", p. 72.
— to select the
Tools > Settings
> Phone and SIM
— to select the active
PIN or UPIN, for the active
(or UPIN code
T o o l s
(network
>
and
89