Puk Codes; Barring Password; Configuration Settings Service - Nokia 3250 User Manual

security module. The module
PIN is supplied with the SIM
card if the SIM card has a
security module in it.
• The signing PIN is required for
the digital signature. The
signing PIN is supplied with the
SIM card if the SIM card has a
security module in it.

PUK codes

The personal unblocking key (PUK)
code and the universal personal
unblocking key (UPUK) code (8
digits) are required to change a
blocked PIN code and UPIN code,
respectively. The PUK2 code is
required to change a blocked PIN2
code.
If the codes are not supplied with
the SIM card, contact your local
service provider for the codes.

Barring password

The barring password (4 digits) is
required when using
See "Call barring",
obtain the password from your
service provider.
If you enter an incorrect barring
password three times in
succession, the password is
blocked. Contact your service
provider or network operator.
Call barring.
p 92. You can
Copyright © 2006 Nokia. All rights reserved.
G e n e r a l i n f o r m a t i o n
■ Configuration
settings service
Before you can use multimedia
messaging, instant messaging,
push to talk, e-mail application,
synchronization, streaming, and
the browser, you must have the
proper configuration settings on
your phone. Your phone may
automatically configure browser,
multimedia messaging, access
point, and streaming settings
based on the SIM card used. You
may receive the settings directly
as a configuration message, which
you save to your phone.
For more information on
availability, contact your network
operator, service provider, or
nearest authorized Nokia dealer.
When you receive a configuration
message, and the settings are not
automatically saved and activated,
1 new message is displayed. Select
Show to open the message. To
save the settings, select Options >
Save. If the phone requests
Configuration settings' PIN
enter the PIN code for the settings,
and select OK. To receive the PIN
code, contact the service provider.
If no settings are saved yet, these
settings are saved and set as
default configuration settings.
code:,
11