Table of Contents
Advertisement
INTRODUCTION
1
The F6100 Safe Air Monitor is designed to provide continuous monitoring of breathing-
air and compressed-air systems. Once set up the instrument will continue to monitor
and data log the air quality at user defined intervals, validating the air quality against a
range of alternative international standards. For breathing-air in the UK this ensures
complete compliance with the relevant requirements of COSHH L5.
The instrument has an intuitive touch screen display, making set up and retrieval of
previous test results easy and quick to complete.
The F6100 has built in electrochemical cells for carbon monoxide and oxygen and an
infrared LED sensor for carbon dioxide. Moisture levels within the breathing air are
measured by a dewpoint sensor. The instrument then displays the moisture content in
pressure or atmospheric dewpoint levels, as well as providing the concentration in
3
mg/m
. It also includes digital airline pressure and ambient temperature readings.
Periodic oil measurements are completed using the Draeger Impactor, which is inserted
into the test port on the instrument. The F6100 provides a prompt to the user whenever
an oil Impactor test is required and the time interval can again be defined by the user in
the set up. The Impactor has no glass or hazardous components and can test for all
known synthetic and mineral oils. This port is also compatible with a range of additional
Draeger chemical reagent tubes, with test times which can be programmed via the
menu, to quantify other potential contaminants.
Calibration and Warranty
Safe-Air Monitors leave our factory with a 12-month warranty and calibration certificate. Our
standard turnaround on annual calibration is 10-15 working days providing there is no major
damage that requires an extensive rebuild. Note:- Please download all stored data before
returning the Tester to Factair.
Temperature Parameters
Storage: -10/+50°C
Operating Range: +10/+35°C
3
Advertisement
Table of Contents
