Table of Contents
Advertisement
Ext Sockets 1 & 2 - 4-20 mA Inputs
Updating the F6100 settings
The software can then be closed by clicking on the red X in the top right hand corner of the
screen.
In the two right hand sections there are settings
for the 2 external inputs. This allows you to
connect devices such as the F6300 Oil Vapour
Monitor. Results from external devices are then
also automatically recorded on the F6100's SD
card.
For further assistance in configuring these
sockets please contact Factair.
Once you have made all the required changes click
on the 'Write to F6100' button.
A message will then be displayed to confirm you
have connected the cable, press ok to proceed.
A message will then be displayed to confirm the
settings have been uploaded into the F6100, click
ok to proceed.
16
Advertisement
Table of Contents
