F6100 Screen Menus - Factair F6100 Operating Instructions Manual

5.2 F6100 SCREEN MENUS

On the home screen the unit displays the
date and time together with the current
reading for carbon dioxide, carbon
monoxide, oxygen and moisture. A green
tick or red exclamation mark next to each of
these confirms whether they are meeting
the selected breathing-air standard. Details
on how to choose the breathing-air
standard and configure this display are
provided later in this manual.
A stylus pen is provided for use with the
touch screen. To enter the sub menu for the
configuration settings or to perform a
Draeger Impactor or tube test, press the
arrow key in the top right hand corner.
The sub menu displays the date when the
test port was last used and the result. The 2
buttons at the bottom of the screen allow
you to review previous tests and enter the
configuration and test port menu. To check
the configuration settings press the right
hand button. After a few seconds the
instrument automatically reverts to the
home screen.
To see previous tests for all the tube
options available please the review button.
This then opens a new screen with the
results. To return to the sub menu press the
arrow key in the top right hand corner of
the screen.
8