Table of Contents
Advertisement
General
Internal Sensors
In the General section there is a range of
configurable options available these include:
A commissioning delay you want which
will then allow time for the sensors to
stabilise before the alarm is activated.
The datalogging interval allows you to
choose how frequently test results are
being saved to the instrument's SD card.
Time between oil test reminders which
allows you to define how frequently you
want the instrument to display an
onscreen reminder for an oil Impactor test.
In the Internal Sensors section you can select
from a range of international breathing-air
standards. The menu display the current test
standard and you will be able to select a range
of alternatives from the drop down menu or
by choosing custom input your own criteria.
At the bottom of this column there are also
tick boxes available to activate the internal
alarm buzzer or the volt free contact for an
external alarm (not provided as standard).
The ratings for volt free contact are 0.5A at
125Vac and 1A at 24Vdc
The socket is shown here from outside the
unit.
The action of the contacts can be adjusted in
the software to be active or passive.
15
1
N/O
2
Common
3
N/C
4
Not Used
Advertisement
Table of Contents
