Table of Contents
Advertisement
Once you have selected which tube you
wish to test the instrument will complete
its purge sequence after which you will
be prompted to insert the appropriate
tube into the test port and tighten firmly.
Note: Both ends of the tube should only
be cut immediately prior to the test.
Ensure the arrow printed on the tube is
pointing away from the instrument.
Press the arrow in the top right corner to
proceed.
The test will proceed as described in
section 3 and at the end of it you will be
prompted to enter the result from the
tube.
For the Nitrous fumes and Sulphur
dioxide tubes enter the result using the
numeric pad. Then press the arrow in the
top right hand corner.
For the oil and polytest tubes select the
appropriate pass or fail icons.
12
Advertisement
Table of Contents
