Ozito CDL-1200U Manual

Ozito CDL-1200U Manual

Advertisement

Quick Links

CORDLESS
DRILL
DRIVER
12V Lithium Ion
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Voltage:
12V
Chuck Size:
10mm Keyless
No Load Speed:
0-700/min
Torque Setting:
17
Max. Torque:
12Nm
Battery:
1.5Ah Li-ion
Charge Time:
3-5 Hours
Weight:
0.94 kg
ozito-diy.co.uk
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectification of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
OZITO UK
Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
WARRANTY
- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,
the work performed or parts fitted will not result in an extension of the
guarantee period, and no new guarantee will become active for the work
performed or parts fitted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
WHAT'S IN THE BOX
Cordless Drill Driver
Charging Adaptor
CDL-1200U
0716

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CDL-1200U and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito CDL-1200U

  • Page 1 3-5 Hours Weight: 0.94 kg ozito-diy.co.uk CDL-1200U WARRANTY All of our products undergo strict quality checks to ensure that they reach - Damage to the device or parts of the device caused by normal or natural you in perfect condition. In the unlikely event that your device develops a wear or tear or by normal use of the device.
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS DRILL DRIVER 1. BATTERY 1 Keyless Chuck 5 Forward/ Reverse Lever 2 Torque Adjustment Collar 6 Charging Socket WARNING! THE POWER SUPPLY FOR THIS CHARGER SHOULD BE PROTECTED BY A RESIDUAL CURRENT 3 LED Light 7 Sure Grip Handle DEVICE (RATED AT 30MA OR LESS).
  • Page 3: Operation

    OPERATION 2. KEYLESS CHUCK 3. CONTROLS Forward/ Reverse Lever WARNING: ENSURE THE TOOL IS TURNED OFF AND 1 For forward rotation, push the fwd/rev lever towards the left side of DISCONNECTED FROM THE POWER SUPPLY BEFORE the drill. For reverse rotation push fwd/rev lever to the right. PERFORMING ANY OF THE FOLLOWING OPERATIONS.
  • Page 4 Do not force the drill or apply side pressure to elongate the hole. Let the drill do all the work. When drilling metals, use light oil on the drill bit to keep it from overheating. The oil will prolong the life of the bit and increase drilling action. CDL-1200U...
  • Page 5: Maintenance

    Ensure that the forward / reverse lever is in the correct position; pressed left for forwards direction, pressed right for backwards direction. If it is in Note: Ozito Industries will not be responsible for any damage or between the two settings the variable speed trigger will be locked.
  • Page 6: Electrical Safety

    ELECTRICAL SAFETY WARNING! The power supply for this product should be protected by a residual current device (rated at 30mA or less). A When using mains-powered tools, basic safety precautions, including the residual current device reduces the risk of electric shock. following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage.
  • Page 7 Please note that the following parts of this product are subject to normal or natural wear and that the Drill Driver CDL-1200U / Charger for CDL-1200U (Ozito) following parts are therefore also required for use as consumables.
  • Page 8 Items supplied The maximum screw diameter indicates the ma- Keep the noise emissions and vibrations to a Please check that the article is complete as ximum diameter of the screw that can be screwed minimum. • specified in the scope of delivery. If parts are into wood.

Table of Contents