Ozito POWER X CHANGE PXCJS-018 Instruction Manual

Ozito POWER X CHANGE PXCJS-018 Instruction Manual

Cordless compact jigsaw

Advertisement

Quick Links

CORDLESS
COMPACT
JIGSAW
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
No Load Speed:
2,700spm
Stroke Height:
20mm
Cutting Depth:
80mm (Timber)
12mm (Plastic)
10mm (Metal)
Bevel Angle:
0-45° (Left & Right)
Blade Type:
T-Shank
Adaptor Size:
Ø36mm
Weight:
1.64kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
STANDARD EQUIPMENT
Cordless Compact Jigsaw
TIMBER
Splinter Guard (fitted), Hex
Key, Timber Jigsaw Blade &
Dust Extraction Adaptor
PXCJS-018
0719

Advertisement

Table of Contents
loading

Summary of Contents for Ozito POWER X CHANGE PXCJS-018

  • Page 1 T-Shank Adaptor Size: Ø36mm Weight: 1.64kg ozito.com.au PXCJS-018 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    1. Hold down the battery release button 2. Slide the battery out. BATTERY & CHARGER This tool is compatible with all batteries & chargers from the Ozito Power X Change range. ONLINE MANUAL Scan this QR Code with your mobile device to take you to...
  • Page 3: Fitting Accessories

    2. FITTING ACCESSORIES WARNING! ENSURE THE BLADE IS REMOVED WARNING! ENSURE THE TOOL IS SWITCHED BEFORE INSTALLING OR REMOVING THE SPLINTER OFF AND THE BATTERY IS REMOVED BEFORE GUARD. PERFORMING ANY OF THE FOLLOWING TASKS. Using The Splinter Guard WARNING! ENSURE THE BLADE IS REMOVED BEFORE INSTALLING OR REMOVING THE BASE The splinter guard also comes pre-assembled on the unit and prevents...
  • Page 4: Fitting The Blade

    3. FITTING THE BLADE Using The Dust Extraction Adaptor WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE The dust extraction adaptor can be used to connect a vacuum to the tool. PERFORMING ANY OF THE FOLLOWING TASKS. This will allow you to remove dust and material chips while cutting.
  • Page 5: Operation

    OPERATION 4. CONTROLS Adjusting The Pendulum Cutting Setting WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE The pendulum cutting feature on the tool allows the blade to cut faster and PERFORMING ANY OF THE FOLLOWING TASKS. more efficiently through thicker and/or softer materials.
  • Page 6 5. MAKING CUTS Pocket Cutting WARNING! ENSURE ALL WORKPIECES ARE SECURELY CLAMPED DOWN. A pocket cut is a hole cut into the middle of a workpiece. Straight Cuts 1. Drill a hole into the workpiece (within the cut line) using a drill bit larger 1.
  • Page 7: Maintenance

    It is advisable when cutting sheet metal to clamp a backing sheet of soft Note: Ozito Industries will not be responsible for any damage or wood or plywood to the work as this will enable you to obtain a clean cut injuries caused by repair of the tool by an unauthorised person or by without vibration and the possibility of tearing the metal.
  • Page 8: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New risk of fire and electric shock.

Table of Contents