Advertisement
l BLG-5000
Using the "Allen wrench", set
the torque referring the torque
adjust scale "1 to 8".
Try to fasten and find the right
position of the scale.
l Test the screw tightening with
the set position and until you
find the appropriate torque
value.
Rotation speed
The standard power output of the driver is set to 30V.
Power output setting display
2: 30V, 1: 20V
To decrease the rotation speed according to work type, set
20V as the power output.
Using the screw counter
You can use BLG-4000-OPC or BLG-5000-OPC by con-
necting it to the power supply BLOP-STC3 with screw coun-
ter or to the separate counter BLOP-SC1 , BLOP-SC3. For
details of handling, please refer to the operation manual of
the screw counter to be used.
l Power supply with screw counter BLOP-STC3
(Single power point)
Torque
adjustment
scale
- 7 -
Hex nut L wrenches
BLG-4000-OPC
BLG-5000-OPC
BLG-ZERO1 series
BLG-BC1 series
BLG-BC2 series
(The shape of the
driver cord (6P) is the
same at both ends)
Advertisement
