IP Unicast Routing
The example in Figure 33 is configured as follows:
create vlan Finance
create vlan Personnel
config Finance add port 2,4
config Personnel add port 3,5
config Finance ipaddress 192.207.35.1
config Personnel ipaddress 192.207.36.1
config rip add vlan Finance
config rip add vlan Personnel
enable ipforwarding
enable rip
Displaying Router Settings
To display settings for various IP routing components, use the commands listed in Table 56.
Table 56: Router Show Commands
Command
show iparp {<ipaddress | vlan <name> |
permanent}
show iparp proxy {<ipaddress> {<mask>}}
show ipconfig {vlan <name>}
show ipconfig {vlan <name>} {detail}
show ipfdb {<ipaddress> <netmask> | vlan
<name> }
show iproute {priority | vlan <vlan> | permanent |
<ipaddress> <netmask> | origin [direct | static |
blackhole | rip | bootp | icmp | ospf-intra |
ospf-inter | ospf-as-external | ospf-extern1 |
ospf-extern2]} {sorted}
show ipstats {vlan <name>}
188
Description
Displays the IP Address Resolution Protocol
(ARP) table. You can filter the display by IP
address, VLAN, or permanent entries.
Displays the proxy ARP table.
Displays configuration information for one or
all VLANs.
Displays IP configuration settings.
Displays the contents of the IP forwarding
database (FDB) table. If no option is
specified, all IP FDB entries are displayed.
Displays the contents of the IP routing table
or the route origin priority.
Displays IP statistics for the CPU of the
system.
Summit 200 Series Switch Installation and User Guide