Self-Check Mode - Panasonic PT-L6500U Service Manual

- The lamp emits small amounts of UV-radiation, avoid direct-eye
contact with the light.
- Because the high pressure lamp involves a risk of explosion, never
touch the lamp wire lead during the service. (See Fig. 3)
2. Operating Instructions
2.1. Operating Instructions
2.2. Guide to Lens Installation

3. Self-Check Mode

This mode is used to narrow down the location of the failure.
3.1. Procedure to enter the self-check mode
While pressing the VOLUME "-" button on the remote control unit, press the left-arrow "
button on the main unit 3 seconds or longer.
Another Method
(can be used for hard to press the button on the main unit, e. g. installed on the ceiling)
1. Select "OSD" on the OPTION 1 menu.
2. MENU OPTION 1
3. Press the "ENTER" button on the remote control unit 3 seconds or
longer and displays the service support mode menu.
4. Select "SELFCHECK" and press on the "ENTER" button on the
remote control unit.
3.2. Self Check Display and Contents
Fig. 3
OSD
5
"