Panasonic PT-L6500U Service Manual page 32

3. Unscrew the 6 screws and remove the lens/LCD block.
4. Peel off the silicone bond to paint lock the incidence polarizer.
- On the working, be careful not to scratch around the paint lock part.
5. Unscrew the 3 screws and remove the incidence polarizer.
6. Install a replacement incidence polarizer.
7. Reassemble the lens/LCD block and connect the flexible cables.
8. After confirming there is no mistake for assemble and connection,
turn on the power and perform adjustments.
Note:
See the next chapter (9 Measurement and Adjustments) for
adjustment method.
When removing them, be careful not to vary the adjusting result by
excessive force.
9. After the adjustment, remove the lens/LCD block according to
steps 2 and 3.
Caution:
10. Paint silicone bond on the lock part to secure the incidence
polarizer.
11. Reassemble the lens/LCD block and connect the flexible cables.
32