Ext Option; Procedure To Enter Ext Option; Ext Option Menu And Functions; Canceling Ext Option - Panasonic PT-LB10NTU Service Manual

PT-LB10NTU / PT-LB10NTE / PT-LB10U / PT-LB10E / PT-LB10VU / PT-LB10VE / PT-LB10SU / PT-LB10SE

2 Ext Option

This projector has EXT OPTION in addition to standard on-screen menus.
· There are SELF CHECK and SERVICE MODE for service, etc.
2.1.

Procedure to enter EXT OPTION

1. Press "MENU" button on the main unit or remote control unit to display "MENU" screen, then select "OPTION1" and press
"ENTER" button.
2. Select "OSD" on "OPTION1" menu and press "ENTER" button 3 seconds or longer.
MENU → OPTION1 → OSD
2.2.

EXT OPTION Menu and Functions

· FREEZE MSG
Switching ON/OFF "FREEZE" on-screen display
· ANGLE RESET
Switching ON/OFF "AUTO KEYSTN (Automatic Keystone)" reference level setting
Note:
− − − − Normally, do not select. (Angle reset data will be rewritten.)
· FAN FULLMODE
Setting the cooling fan motor rotation speed
− − − − Switching ON "FAN FULLMODE", the rotation level of the fan becomes high-speed rotation (fixed). Moreover, when "FAN
FULLMODE" is ON, changing "FAN CONTROL" in OPTION2 becomes impossible (setting FAN FULLMODE is given priority
more thanFAN CONTROL).
· AUTOSETUP
Setting AUTO SETUP mode
− − − − STANDARD: To set the normal mode (the dot clock is adjusted strictly))
− − − − SPECIAL: To set the special mode (the dot clock is adjusted roughly)
Note:
− − − − Do not change the initial setting (STANDARD).
· SELF CHECK
To enter the self-check mode
· SERVICE MODE
To enter the service mode
· FLICKER ADJ
To enter the flicker adjustment mode
2.3.

Canceling EXT OPTION

Press "MENU" button on the main unit or remote control unit.

3 Self-Check Mode

This mode is used to narrow down the location of the failure.
6